Punktir-S is the only perimeter security system made in Kazakhstan, confirmed by the certificate “On the origin of goods ST KZ”
The Punktir-S system is built on the basis of addressable piezoelectric sensors-detectors mounted on fencing elements and recording their mechanical vibrations. “Punktir-S” can be equipped with sensor-detectors of various designs: a sensor-detector for open installation and a sensor-detector in a metal holder with springs, for covert installation inside hollow structures of fence supports.
In addition to sensor-detectors, input/output modules can be connected to the communication line, providing, if necessary, control of second-line detectors using Punktir-S VSO.
The analysis algorithm involves comparing in real time the signal levels of sensor-detectors with a threshold specified during setup, comparing the signal level with signals from four other neighboring sensor-detectors. Since rain, hail, wind, and soil vibrations from the movement of heavy road and rail transport affect extended sections of the fence equally, group analysis of sensor-detector signals makes it possible to identify such impacts and prevent the formation of false alarms.
The architecture of the system provides for its construction according to the “ring” scheme, which guarantees the preservation of full functionality in the event of a single break in the sensor line. The ability to connect central processors via an Ethernet network under the control of a higher-level system ensures full or partial preservation of functionality even in the event of several interruptions.
Advantages of SOP “Punktir-S”
Localization of attempts to overcome a fence accurate to the sensor detector
Precise localization of the intrusion site allows you to increase the information content of security video surveillance, the reliability of alarm verification and ensure appropriate automatic reactions from security lighting and other systems; increases the speed of response and correctness of decisions made by physical security and maintenance personnel.
Unified system for all types of fencing
Individual configuration of each sensor-detector allows you to create a protection system for objects equipped with fences of various designs: mesh, welded, forged, concrete/brick fences (for a break), corrugated sheets, chain-link mesh, etc. The presence of hidden installation sensors makes it possible the use of VSO at sites where it is necessary to preserve the architectural and artistic appearance and/or exclude visual detection of the presence of an alarm system.
Minimum false positives
A processing algorithm based on comparison of signals from neighboring sensors allows to minimize the number of false alarms caused by environmental influences, such as rain, gusts of wind, hail, lightning.
Hardware integration with IP cameras
When an intrusion is detected by the sensors of the “Punktir-S” system, the external PTZ IP camera is automatically aimed at the alarm sector to identify the source of the alarm
High noise immunity and survivability of the system when exposed to:- mechanical interference (vibrations of the fence from the passage ofjarring transport, climatic factors - wind, rain, hail) - is provided by a special algorithm for group processing of signals from sensor-detectors;
- electromagnetic interference - due to the use of noise-resistant coding when exchanging information along the sensor line;
- damage (accidental or intentional) to the line of sensors and detectors - due to the possibility of working in a ring topology and the presence of line short circuit insulators.
Easy installation and reduced installation and commissioning costs:
equipping up to 3000 meters of fences with a single connection point for a communication line, the ability to supply a line of addressable sensors-detectors assembled and configured by the manufacturer with specified distances between sensors.
Wide operating temperature range
from -60 to +85 °C.
We offer to test the Punktir-S SOP at your facility
3000
128
128
